真倒霉 but, It Will All be Alright

 

 We had a minor setback with our tiny shack. The tongue and groove plywood on one side of the trailer wasn't cut properly and didn't line up with the metal frame; where the seam of the boards should be screwed in. So in less than a hour Charlie and I ripped up the sill plate and the plywood.

 After the problem plywood was evicted there was room for Jacob and Charlie to measure (quadruple check), cut, and use the self tapping screws to attach the plywood. After the tongue and groove was properly fitted then came the completed sill plate! Next step is getting supplies and starting to frame the walls.

 

Yet again a monkey wrench gets thrown in the works and we come out better than we started.