Jacob measured, cut, glued, and screwed
some 2x4's into the porch. He realized that the fascia also needed to go
in those sections where our porch goes. Better late than never! The
sill sealer that we got was then taped onto the metal beams as a cushion
between the plywood and the trailer frame. He was then able to
measure, cut, and drill the tongue and groove plywood. Shout out to
neighbor John who helped Jacob maneuver the bigger plywood sections to
fit snug around the welded metal rods. Charlie also helped with cutting
and fitting the smaller sections in. Finally with everything fit on
Jacob secured it all down with the self tapping screws.
Next to come: the pile of 2x4's on the trailer is going to be the sill plate which will be what we secure the walls to. Tomorrow Jacob will be measuring, and cutting the boards in preparation for their attachment!
No comments:
Post a Comment